| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Interior | Section: Heating/Air Conditioning | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000000WCZ00VX |
| Title: HEATING / AIR CONDITIONING: CONDENSER: REASSEMBLY (2008 Sequoia) | ||
REASSEMBLY
1. INSTALL COOLER DRYER
|
(a) Using pliers, install the cooler dryer onto the modulator. |
|
(b) Apply sufficient compressor oil to the O-ring and the fitting surface of the cap. Compressor oil: ND-OIL 8 or equivalent |
|
(c) Using a 14 mm straight hexagon wrench, install the cap onto the cooler condenser core. Torque: 2.9 N·m (30 kgf·cm, 26 in·lbf) |
2. INSTALL NO. 2 COOLER CONDENSER CUSHION
|
(a) Install the 2 cushions to the cooler condenser. |
3. INSTALL NO. 1 COOLER CONDENSER CUSHION
|
(a) Install the collar to the cushions. |
|
(b) Install the 2 cushions to the cooler condenser. |
|
|